Oatey PVC Rain-R-Shine Cement - Blue
Sku
609404-P
Find In StoreThis item is only available for curbside and in-store pickup at a North 40 Outfitters store. Please check the store availability tab to view inventory at your preferred North 40 Outfitters.
Oatey PVC Rain-R-Shine Cement is formulated for wet conditions or situations involving fast installation or pressurization of PVC pipe and fittings up to 6" diameter with interference fit.
- Very fast setting
- Recommended for pool, irrigation, potable water, pressure pipe, conduit and DWV
- Recommended application temperature 40°F to 110°F / 4°C to 43°C
- No primer needed on non-pressure DWV, up through 6" diameter where local codes permit
- Meets ASTM D2564 Prior To Use:
- Stir or shake cement before using. If jelly-like, do not use. Keep container closed when not in use. Avoid eye and skin contact. Wear safety glasses with side shields and wear rubber gloves
- Square pipe ends, chamfer and remove all dirt
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms, it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter. For larger size pipe systems use a natural bristle brush or roller
- Clean pipe and fitting with a listed primer. (Do not use primer on ABS pipe and fittings. Use Clear Cleaner only!)
- Apply liberal coat of cement to pipe to the depth of the socket, leave no uncoated surface
- Apply a thin coat of cement to inside of fitting, avoid puddling of cement. Puddling can cause weakening and premature failure of pipe or fitting. Apply a second coat of cement to the pipe
- Assemble parts QUICKLY. Cement must be fluid. If cement surface has dried, recoat both parts
- Push pipe FULLY into fitting using a 1/4 turning motion until pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out – longer at low temperatures. Wipe off excess
- Allow 15 min for good handling strength and 2 hrs cure time at temperatures above 60°F before pressure testing up to 180 psi. Longer cure times may be required at temperatures below 60°F or with pipe above 3". DO NOT TEST WITH AIR
Inventory is constantly changing. To ensure availability upon arrival, purchase your item now and select the Curbside Pickup option at checkout. We will pull the item for you and have it waiting for your arrival.