Flex Seal Silicone Flex Caulk - 6.5 oz

Flex Caulk Silicone (100% silicone caulk) are the latest innovations in caulking technology. They are delivered through the Adjustable Trigger Flow Nozzle, which eliminates the need for a caulking gun and allows you to control the flow of caulk. Just adjust the flow setting and push the trigger for a perfect bead. And when you stop, it stops. There's no running, no dripping and no mess.

• Seals out water, air and moisture
• Flexible and durable, lasts for years
• 100% waterproof and weatherproof
• UV, chemical and mildew resistant
• Use indoors or outdoors
• Easy to use
• Won't shrink, crack or become brittle
• "Snap & Save" cap eliminates waste
• Fast drying, solvent-free and won't yellow
• Perfect for hard-to-reach areas
• Flex Caulk contains a preservative which inhibits the growth of mildew on the surface of this caulk
• Excellent For: Bathrooms, kitchens, sinks, showers, toilets, backsplashes, countertops, baseboards, moulding, pipes, skylights, windows, doors, auto and boat repairs and more
• Works On: Porcelain, tile, metal, glass, fiberglass, wood, granite, stone, marble, fabric, upholstery, paper and just about any other surface that is free of grease and oil
• Recommended Use: Flex Caulk Silicone works best on smooth, non-porous materials

Use in a well-ventilated area (Silicone). Make sure surface is clean, free of dirt, grease and oil. Remove the tab (where the can meets the adjustable nozzle) before initial use. Remove "Snap & Save" cap. Adjust the flow setting to "MAX". Hold can a 45° angle and push the trigger to start flow. Keep pushing trigger while moving the nozzle across the area. Always use a smooth, even motion when applying the caulk. Bead thickness is controlled by the flow setting and speed you move. Remove excess caulk with a dry paper towel. Do not use water. Material can be smoothed within 10 mins of application and cures in 24 hrs (depending on temperature and humidity). After use, wipe off the nozzle tip, secure the "Snap & Save" cap and turn the flow setting counterclockwise, past "Min", until it stops.

Remove the "Snap & Save" cap. Turn nozzle Right (clockwise) to the "MAX" position. Press the trigger to start caulk flow. If caulk doesn't flow, unscrew and remove the nozzle, use a nail or similar tool to clear any blockage in the nozzle, screw the nozzle back on and press the trigger to start caulk flow.

• Net Weight: 6.5 oz