Gorilla Heavy Duty Spray Adhesive - 14 oz

Gorilla Spray Adhesive is heavy duty, multi-purpose and easy to use. Gorilla Spray Adhesive forms a clear, permanent bond that is moisture resistant and can be used on projects both indoors and out. This spray adhesive is also photo safe. It's wide pad nozzle and controlled, fine mist spray provide an even application on the project you are working on.

• Heavy Duty: Dries permanent
• Easy to Use: Repositionable
• Clear Color: Non-yellowing
• Indoor & Outdoor: Moisture resistant
• Controlled Spray: Even application
• Comfort nozzle
• Photo safe
• Meets VOC Standard: 30% voc mist spray adhesive

• Application temperature: 50° to 90°F
• Outdoor: Yes
• Moisture Resistant: Yes
• Paintable: Yes
• Sandable: Yes
• Cured Color: Clear
• Photo Safe: Yes

All surfaces should be clean and free of dirt, grease and oil. Protect surrounding areas from overspray to avoid residual adhesive.

• Shake can well before using
• Hold the can 6" to 8" from surfaces to be bonded and spray an even coat of adhesive
• For Maximum Bond Strength: Spray both surfaces to be joined. Allow to dry to tack (approximately 1 min) and press surfaces firmly together. For Repositionable Bonds: Spray a light even coat on one surface. Allow to dry 1-3 min before joining. Repositionable up to 10 min depending on surface type, then bond becomes permanent. To remove, gently peel from corner. Tip: To avoid possible clogging, turn can away from body, turn upside down and spray a short jet of clear gas after completing the job
• Not recommended for use on vinyl materials, automotive headliners, polypropylene, polyethylene or similar materials. Do not use for bonding weighted materials

Direct UV exposure may affect color.