Lux Pro High-Output Handheld Flashlight - 550 Lumens - 1.48" - 5.7"

Lux Pro bright 550 lumens LED handheld flashlight with TackGrip. A compact flashlight that puts off a clean light beam. With 4 lighting modes, users can get the light they need for any situation. Access 550 lumens on High, 185 on medium and 40 on ultra-low. The Ultra-Low setting gives you an extended runtime of up to 20 hrs. This is crucial for emergency situations. Hidden Strobe is a mode that can be accessed and exited by pressing the on/off button for approximately 3-4 sec. Updated electronics allows users to turn the light off with one click after using the selected mode for more than 5 sec. Constructed with aircraft-grade aluminum and TackGrip making it extremely durable. TackGrip is patented, exclusive to Lux Pro and is molded directly to the aluminum body for longer-lasting durability that won’t slide or curl. This light is O-ring sealed and water resistant with an IPX4 rating. It operates on and comes loaded with 4 AAA alkaline Lux Pro batteries.

• Pocket-sized LED handheld flashlight
• Modes: High, Med, Low & Hidden Strobe
• One-click off advanced electronics
• Aircraft-grade aluminum
• IPX4 waterproof rating
• Wrist lanyard included

• Lumens: 550 Lumens (High Mode) - 185 Lumens (Medium Mode) - 40 Lumens (Low Mode)
• Run Time: 1 hr 45 min (High Mode) - 9 hrs 30 min (Medium Mode) - 20 hrs (Low Mode)
• Beam Distance: 335m (High Mode) - 190m (Medium Mode) - 85m (Low Mode)
• Battery Count/Size: 4 AAA
• Width: 1.48"
• Height: 5.7"
• Weight: .38 lb
• Warranty: Lifetime Limited Warranty

• On/Off: Press and release the button on the tail cap to turn the light on and off
• Hidden Strobe On/Off: Press and hold button for 3 sec to activate hidden strobe. Flashlight will remain in hidden strobe mode until it is deactivated by pushing and holding the button for 3 sec again
• Cycle Modes: Press button on tail cap quickly to cycle through modes (High/Medium/Ultra-Low). If the light remains in a single mode for longer than 3-5 sec the next press of the button will turn the light off
• Light automatically resets to high mode when turned off
• Once the battery has drained too low to allow the flashlight to run on high mode, the LP600V3 is programed to turn off. At this point the flashlight can still run on medium and low modes. Continuously running the flashlight in high mode and turning the light on and off will drain the battery of the light more quickly

The LP600V3 uses 4 AAA batteries. To change the batteries, turn the tail cap counterclockwise to remove it. Tip the light downward to slide out the battery case which contains the batteries. Remove the batteries from the case and insert new batteries according to the (+/-) symbols found on the case. For best results, recommend using brand new alkaline batteries that are the same voltage and brand. Re-insert battery case into flashlight with the metal knob and arrow on the battery case pointing down. Re-attach the tail cap by pressing down lightly and turning it clockwise until tight.