STIHL MS 391 33RS3 Chainsaw - 25"

Sku
1140537
$859.99
 
  • Bumper spikes
  • Side-access chain tensioner
  • Anti-vibration system
  • Master control lever
Quantity 1

This item is only available for curbside and in-store pickup at a North 40 Outfitters store. Please check the store availability tab to view inventory at your preferred North 40 Outfitters. 

This mid-range chainsaw comes with an anti-vibration system and reduced exhaust emission engine technology. STIHL engine technology means low fuel consumption, longer run times and reduced exhaust emissions in this high-powered chainsaw. The MS 391 features STIHL engine technology that adds fuel efficiency while reducing exhaust emissions, as compared to other chainsaw models. Though equal in weight, the MS 391 is more powerful than the MS 311. Add to that an optimal power-to-weight ratio and you have a chainsaw that's cut out for the big jobs in field, farm and ranch. Felling trees, cutting firewood and cleanup after the storm just got a whole lot easier with the rugged MS 391.

  • IntelliCarb Compensating Carburetor: The IntelliCarb Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine correct RPM. IntelliCarb uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air for the carburetor, the IntelliCarb system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the "dirty" side of the air box
  • Bumper Spikes: These spikes prevent pull-in and provide better control, making cutting easier
  • Toolless Fuel and Oil Caps with Retainers: Simply lift the lever and twist the caps to remove or tighten. There's no need to use a tool to tighten or loosen
  • Pre-Separation Air Filtration System: This time-saving technology boosts the efficiency of the engine filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance
  • Side-Access Chain Tensioner: The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw
  • Anti-Vibration System: STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience
  • Master Control Lever: It is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever to the choke position
  • Throttle Trigger Lockout: This safety feature must be depressed before the trigger can be activated
  • High-Tech Polymer Housings: Housings are lightweight, withstand greater impact and are corrosion-resistant
  • Reduced-Emission Engine Technology-Caring for Nature: The STIHL Inc. "Caring for Nature" seal identifies it's powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines "low exhaust emissions" as being cleaner than EPA and CARB exhaust emission standards
Specifications
  • Power Source: Gas
  • Guide Bar Length (Recommended): 25"
  • Oilomatic Chain: 3/8" RS3
  • Displacement: 64.1 cc
  • Warranty: Limited Warranty
Note

The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on. STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty.

Important Safety Information

The occurrence called "kickback" can cause serious or fatal injury. Always read the instruction manual carefully before using your saw. STIHL uses a green and yellow color-coding system to help you select a powerhead, bar and chain combination that complies with the kickback requirements of ANSI Standard B175.1 (gasoline-powered saws) and 30 of UL 1662/ ANSI Standard B175.1 (electric chainsaws). Ask your STIHL dealer about safe operating procedures and the advantages of the STIHL Quickstop chain brake, STIHL Quickstop Plus additional chain braking feature, STIHL reduced kickback bars and STIHL low-kickback saw chains. STIHL recommends the use of green reduced kickback bars and green low kickback chains on all STIHL chainsaws.

Warning

Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.

Inventory is constantly changing. To ensure availability upon arrival, purchase your item now and select the Curbside Pickup option at checkout. We will pull the item for you and have it waiting for your arrival.

Local store prices may vary from those displayed. Products shown as available are normally stocked, but inventory levels cannot be guaranteed. North 40 Outfitters operates strictly as a retailer, not a wholesaler. We reserve the right to decline orders to other retail outlets and/or any other reseller to provide product availability for our end-user customers. If you have questions or concerns about this policy, please call 844.466.8440.
© 2026 CSWW Inc. All Rights Reserved. Use of this site is subject to certain Terms of Use which constitute a legal agreement between you and North 40 Outfitters.