Titebond Original Wood Glue

Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sand ability and is unaffected by finishes. Original glue can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Easy to use, non-toxic and cleans up with water.

Features

• Fast set - Shortens clamp time
• Bonds stronger than wood
• Solvent-resistant
• Excellent sand ability
• Unaffected by finishes
• Easy cleanup with water
• Fda approved for indirect food contact

Specifications

• Conforms to ASTM D-4236
• Units per package: 12

Packages per pallet

• 4 oz Bottle: 270
• 8 oz Bottle: 160
• 16 oz Bottle: 100

Application Guidelines

• Application Temperature: Above 50°F
• Open Assembly Time: 4-6 min (70°F./50%RH)
• Total Assembly Time: 10-15 min (70°F./50%RH)
• Minimum Required Spread: Approximately 6 mils or 250 sq. ft. per gal
• Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
• Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush
• Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess
• Limitations: The Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use III Ultimate Wood Glue or II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 50°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. Keep From Freezing. Keep Out of the Reach of Children

Physical Properties

• Type: Aliphatic resin emulsion
• Calculated Voc: 10.7 g/L
• State: Liquid
• Weight per gal: 9.2 lb
• Color: Yellow
Dried flim: Translucent
• Flashpoint: > 200°F
• Solids: 46%
• Freeze/Thaw stability: Stable
• Viscosity: 3,200 cps
• PH: 4.0
• Chalk temperature: To assure a good bond, 50°F is the lowest recommended temperature of the glue, air and materials during application
• Storage life: 24 months in tightly closed containers at 75°F

Bond Strength ASTM D-905 (On Hard Maple)

Room Temperature

• Strength: 3,650 psi
• Wood Failure: 68%

150°F. Overnight

• Strength: 1,250 psi
• Wood Failure: 1%

Caution Statement

• Caution: Eye and skin irritant. Do not swallow. Do not allow eye contact or prolonged skin contact. First Aid: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 min. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. Keep out of the reach of children