Zircon Stud Sensor Pro SL

Stud Sensor Pro SL stud finder locates the edges of wood and metal studs and joists behind walls, floors and ceilings. Patented SpotLite Pointing System shines a beam of light on the wall to identify the target.

• Stud Scan mode locates the edges of wood or metal studs up to 3/4" (19mm) deep
• DeepScan mode doubles the scanning depth to 1-1/2" (38mm)
• Red LED's light up every time a stud edge is approached
• Patented SpotLite Pointing System, audio alert and a green LED signals when the stud edge is reached
• Zircon patented "over-the-stud" indication alerts user to start the scan in a new location if scanning begins over a stud
• Battery cover also doubles as a belt clip
• Patented SpotLite Pointing System, an audio alert and a green LED signals when the stud edge is reached
• Patented TruCal technology calibrates to any wall's density and a steady green LED TruCal light alerts the user when the tool is ready and calibrated
• Find stud edges
• Find wood or metal studs
• Scan thick walls for studs
• DeepScan Mode: Doubles scanning depth for thicker surfaces
• SpotLite Beam: Project a beam of light to visualize stud location
• Water Resistance: Splash and water resistant, not waterproof

• Height: 5.57"
• Width: 2.34"
• Depth: 1.14"
• Battery Type: 9V Alkaline (not included)
• Operating Temperature: 20° to 105°F (-7° to 41°C)
• Storage Temperature: -20° to 150°F (-29° to 66°C)
• Humidity: 5-90% RH (non-condensing)
• Weight: 2.4 oz Without Battery

• Up to a depth of 3/4": Typically within 1/8" (3mm) using the dual scan and mark procedure
• Up to a depth of 1-1/2": Typically within 3/16" (5mm) using the dual scan and mark procedure

Sensing depth and accuracy can vary due to moisture, content of materials, wall texture, paint, etc. Indoor use only.