Easy Heat Pipe Heat Cable

Features:

• Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
• Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
• Cables are rated at 7 Watts per 1 ft (0.30 m)
• Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
• Plugs into a standard 120 Vac outlet, must be GFCI protected
• Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
• Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
• Pre-assembled and ready to install
• Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
• Integral thermostat saves energy by powering the cable only when needed
• One year limited warranty

Specifications:

• CertificationsUL Listed to Canadian Safety Standards and CSA Certified when used in accordance with instructions on water filled metal or plastic pipes
• Accessories It is recommended to use EasyHeat™ HCA application tape or good quality electrical tape with a minimum +176 °F (+80 °C) temperature rating to secure heating cable(s) to pipes. See EasyHeat™ Pipe Tracing Accessories