Hobart Air Force 700i Plasma Cutter

This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals. The AirForce 700i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The Airforce 700i plasma cutting system is excellent for light and heavy industrial users. Automated operations are also well within its range. Unit is compatible with engine-driven welders when powered with a 240V generator power outlet of 8000w or more.

• Cuts 3/8-5/8" steel if powered by an engine-driven welder with a 240V generator power outlet of 8000w or more
• Designed for increased comfort, more efficient cooling, and economical replacement cutting tips
• Built to withstand tough working environments, rated for 35% duty cycle at 104°F
• Provides peak performance power under variable input voltage conditions (+/-15%) for steady and cleaner ending cuts
• Post-flow air cooling cools the torch and tip after cutting, extending life of replaceable tip and electrode

Specifications

• Rated Output: 40A with 140VDC
• Amp Input at Rated Load 208V: 33
• Amp Input at Rated Load 230V: 30
• Amp Input at Rated Load KVA: 6.8
• Amp Input at Rated Load KW: 6.6
• Frequency: 50/60 Hz
• Phase: 1 Phase
• Maximum Open Circuit Voltage: 400VDC
• Plasma Gas Flow/Pressure: 4.8 CFM
• Height: 11.25""
• Width: 8.25"
• Depth: 14.25"
• Weight: 31.4 lb

Applications

• Prototyping
• Light construction
• Body shops/fabrications

Includes

• 16.5' HP-70 hand-held torch
• 16.5' work cable with clamp
• Extra comsumables
• 10' power cord with plug
• Easy to connect, built-in gas/air filter and regulator for extra protection